大家在查： momochiang 相互抵消 hrxh krises 65.82 向后退却 AribaSN OTZZZ Hsun manured

钎料

n.brazing filler metal
网络solder; Zn solder; Cu solder

钎料

英-汉网络释义

钎料

brazing filler metal

常用的焊接名词中英文对照表 - 豆丁网 ... 锻焊 Forge-Welding 钎料 Brazing Filler Metal 钎剂 Brazing Flux ...

solder

中国寰球化学工程常用词汇 - MBA智库文档 ... 油膜轴承合金 Kelmet 钎料 solder 银钎料 silver solder 24.2 ...

Zn solder

Sn-3.5Ag-0.5Cu钎料,Sn... ... ) Sn-3.5Ag-0.5Cu solder 钎料 ) Sn-3.5Ag-1.0Zn solder 钎料 ) Sn-3.0Ag-0.5Cu solder 焊料 ...

Cu solder

Sn-3.0Ag-0.5Cu焊料,Sn-3.0Ag-0.5Cu... ... ) Sn-3.5Ag-0.5Cu solder 钎料 ) Cu/Sn-3.0Ag-0.5Cu/Cu joint 焊点 ...

Sn-Bi-Ag-Cu solder

Sn-Ag... ... ) lead-free solder of Sn-Ag-Cu 系无铅焊料 ) Sn-Bi-Ag-Cu solder 钎料 ) Sn-Ag-Cu lead-free joints 无铅焊点 ...

Au-Ag-Ge brazing alloy

Au/Ag值,Au/Ag,音标,读音,翻译,英文例句,英语... ... ) Au-Ag series 系列 ) Au-Ag-Ge brazing alloy 钎料 ) Au、Ag elements 元素 ...

Ni-Cr Filler Alloy

Ni-Cr-Co-W-Mo-B钎料,Ni-Cr-Co-W-Mo... ... ) Ni-Cr-Fe-Mo-Co-W Alloy 合金 ) Ni-Cr Filler Alloy 钎料 ) Ni-Cr-W-Mo alloy 合金 ...

Ni-Cr-Co-W-Mo-B powder

Ni-Cr-Co-W-Mo... ... ) W-Mo-Ni-Cr/Al_2O_3 catalyst 催化剂 ) Ni-Cr-Co-W-Mo-B powder 钎料 ) Ni-Cr-Fe-Mo-Co-W Alloy 合金 ...

例句：

mechanical properties and the creep -rupture life of the nanon-sized Ag particles reinforced Sn-37Pb composite solder were investigated .

研究了纳米银颗粒增强锡铅基复合钎料的物理性能、工艺性能、力学性能和蠕变性能。

It indicates the strong retention of brazing alloy to diamond grits and the longer service life of the wheel .

这表明钎料合金对磨粒的高强度把持和砂轮的高耐用度。

Effects of fillers and brazing parameters on mechanical properties and microstructures of brazed joints were investigated .

研究了钎料类型及钎焊工艺对钎缝接头力学性能与微观结构的影响。

The wetting angle of the rapid solidification solder is smaller than the ordinary solder , and the spreading area increases.

快速凝固钎料的润湿角比普通钎料的润湿角小，铺展面积增大；

The results show that the microstructure of brazing filler metal is mostly solid solution phase.

结果表明，钎料区主要是固溶体组织；

The advantages and disadvantages of various welding methods and development of filler metals and fluxes are introduced .

介绍了各种焊接方法的优缺点以及钎料、钎剂的开发进展。

the soft flux is laid on the annular solder , and the assembled pot body is put in the resistance furnace for welding .

用软钎剂涂在环形钎料上，将组装好的锅体放入电阻炉中进行焊接。

Some key problems in developing lead-free solder were analyzed and some suggestions of solving the problems were put forward .

分析了无铅钎料研究必须解决的几个关键问题，并提出了解决这些问题的思路和建议。

Includes chapters on the latest technology in filler metals and welding rod .

包括关于在钎料和焊条最新技术的章节。

The mechanism of the solder bridge is studied according to the analysis of the simulation results .

通过分析模拟结果，对 SMT 焊点钎料桥接机理进行理论研究。

Collecting pipe and fin are composite layer material, and the solder coated the base metal.

集流管和翅片都是复合层材料，钎料层包覆在母材表面。

Precious metals - The finenesses of solders used with precious metal jewellery alloys .

贵金属 .与贵金属珠宝合金一起使用的钎料的精细度

THE PRESENT SITUATION AND ANALYSIS OF EXTRUSION TECHNOLOGY FOR BRAZING FILLER METALS IN THE WORLD.

国外硬钎料挤压技术的现状与分析。

The atoms of ceramic are connected by covalent or ionic bond , as a result it is difficult for filler metal to wet the ceramic surface .

陶瓷的原子结构为强共价键或离子键结合，钎料难以对其表面润湿。

BFM's will not flow over grease, oil, oxides or dirt.

钎料不能在油脂、氧化物、或者脏物上流动？

Alloy for double welding , very tough .

双重焊接用的钎料，非常硬。

The development and application of lead-free solders are introduced in recent years and some lead-free legislation are introduced too.

介绍了近几年无铅钎料的应用研究和发展情况以及与无铅钎料有关的立法。

A lead-free hard solder material is a kind of lead-free alloy .

无铅钎料，它涉及一种合金，特别是一种无铅的钎焊合金。

The development of lead-free solder at home and abroad was reviewed .

综述了近几年国内外无铅钎料的研究现状；

At the same time, experiments on PBGA solder ball laser reflow were carried out.

同时，本文还对 PBGA 钎料球激光重熔进行了试验研究。

The copper-phosphorus filler metals are suitable to braze copper , brasses but they can not be suitable to braze ferrous .

铜磷钎料适宜于钎焊铜及黄铜墙铁壁，但是不适宜钎焊黑色金属。

Adaptability of brazing filling metal used for monolayer diamond tools with vacuum furnace brazing

金刚石工具真空钎焊钎料的适应性

Study on Brazing of SiC Ceramics with Aluminum base Filler Metals and Their Wettability on the Surface of SiC Substrates

用铝基钎料钎焊 SiC 陶瓷及其在 SiC 陶瓷表面浸润性的研究

钎料

钎料