大家在查：百分之六十到 mummified body 大卫莱 absorption spectroscopy serializes 丁聚 Kairi 日益剧增 TrackViewState Mengshan

拉伸模

网络drawing dies; Senior Tool Design Engineer; draw die

拉伸模

网络释义

拉伸模

drawing dies

【精品文献】模具 - 豆丁网 ... 扭曲模 twisting dies 1.14 拉伸模 drawing dies 1.14.1 反拉伸模 reverse redrawing dies 1.14.2 ...

Senior Tool Design Engineer

杭州瑞诺企业管... ... Senior Tool Fabrication Engineer （拉伸模） Senior Tool Design Engineer （拉伸模） Purchaser (包材 …

draw die

模具专业术语日文版怎么写，谁帮帮我。_百度知道 ... 落料模： blank die 拉伸模： draw die 工程模： manual tool ...

drawing die nibs

...trips)、圆片刀(disc cutters)、拉伸模(drawing die nibs)、地矿产品、高比重合金、耐磨件以及非标制品共十大系列1300余种规 …

Senior Tool Fabrication Engineer

杭州瑞诺企业管理咨询有限公司招聘信息 ... Senior Tool Fabrication Engineer （拉伸模） Senior Tool Design Engineer （拉伸 …

G-band

)和正切拉伸模(G-band)的增强，可以得到单壁碳纳米管的细微结构信息，确认单壁碳纳米管的手性（n, m）。

例句：

The results show that tensile strength and tensile modulus increase and cold-resisting property descends with temperature dropping .

结果表明，随着温度的降低，该橡胶的拉伸强度、拉伸模量升高，耐寒性下降；

CF tensile modulus increased with speed of loading increasing during test.

随拉伸速率的增加，碳纤维的拉伸模量逐渐增加。

With VP-501 content increasing , the fracture toughness was increased , while the tensile modulus was decreased at both RT and 77 K.

随着 VP-501 含量的增加，体系在 RT 和 77K 下的断裂韧性增加了，然而其拉伸模量降低了。

Such as : Drawing Die , Die, Die compound, such as various types of molding die die !

如：拉伸模，连续模，复合模，成型模等各类模具！

Design of Drawing Die for a Small Round Angle Cylinder Part

小圆角圆筒拉伸模设计

Mold Designs of Stretching Box-like Stainless Steel Parts and Ellipse Cylinder-shaped Parts

不锈钢盒形件与椭圆筒形件拉伸模设计

The Improvement of Drawing Die for the Spherical Surface Bearing Housing

球面轴承座拉伸模的改进

Current situation and development tendency of designing autobody outpanels'drawing dies

汽车覆盖件拉伸模的设计现状及发展方向

Failure Analysis and Preventive Measures of Drawing Die for Auto Body Covering Parts

车身覆盖件拉伸模的失效分析与防护措施

Design of the Drawing Die for the Shell Bottom of Iveco Auto Vacuum Booster

依维柯汽车真空助力器壳底拉伸模设计

The Processing of the Drawing Die with Inter -spiral-groove by Linear Cutter

内螺旋型拉伸模的线切割加工

Optimized Design of the Drawing Die for the Shadow? Mask Frame

荫罩框架拉伸模的优化设计

Design of Drawing Die and Forming Analysis for the Cover of Automobile Clutch

汽车离合器压盘盖拉伸模设计及成形工艺分析

Application of Brush Plating Technology on Drawing Die of Automotive Panel

刷镀技术在汽车大型覆盖件拉伸模上的应用

Improvement of Manufacture Technology for Drawing Die

拉伸模加工工艺的改进

Design of Drawing Die and Side Punching Die for the Outer Shelf of Linear Axletree

直线轴承外骨架拉伸模及侧面冲槽模设计

Development and Manufacture of Large Drawing Dies by Ceramal Fine Casting

陶瓷型合金精铸大型拉伸模研制

Forming process and design of automatic forming die for aluminum teapot mouth

铝茶壶嘴成形工艺与自动拉伸模设计

Design of Drawing Die with Adjustable Constant Blank Holder Pressure

可调式恒压边力拉伸模设计

Design of the Drawing Die with Combined Pre-stressing Matrix

运用预应力组合凹模的拉伸模设计

The CAD System for the Drawing Dies for Hemispherical-Shell Parts Based on FEM Simulation Technology

基于有限元模拟技术的球壳类零件拉伸模 CAD 系统

Analysis of Normal Fracture Generation on Drawing Die

拉伸模常见破裂原因分析

Design and Manufacturing of Drawing Die for the Mixer Tub

搅拌机底桶座拉伸模设计与制造

Design and Manufacture of Drawing Die for the Driver Door

司机门拉伸模设计与制造

Analysis of forming process and design of die for exhaust pipe shield

排气管罩拉伸模设计及成形工艺分析

Improved Design on Re-Drawing Die for the Barrel-Shape Parts

筒形类零件二次拉伸模的改进设计

The design of universal stretch die carrier and special unit

通用拉伸模架及专用件的设计

拉伸模

拉伸模