大家在查：外墙 MCI-154 TimSpector 畅销图书 proarrhythmic 压力计 metallograph 黏滞可读二氢

缩松

na.shrinkage porosity
网络usp; shrinking casting; dispersed shrinkage

缩松

英-汉网络释义

缩松

shrinkage porosity

金属工艺学英语单词 - 豆丁网 ... 缩孔 shrinkage cavity 缩松 shrinkage porosity 缩裂 contraction crack ...

usp

内服的有强的松、地塞米松及一些进口的高浓度激素针剂曲胺缩松(usp)等。青岛东大皮肤病医院专家指出：皮质激素控制银屑 …

shrinking casting

casting binder_翻译 ... 铸钢： steel casting 缩松： shrinking casting 压铸： die-casting ...

dispersed shrinkage

压铸英语 - 萍碎无垠的日志 - 网易博客 ... 缩孔 shrinkage 缩松 dispersed shrinkage 渗漏 leakage ...

Triamcinolone Acetonide

...de）、氟尼缩松(Flunisolide)和曲安缩松(Triamcinolone Acetonide)等。

Sinkmark

Moldflow做的注塑分析很全面，对注塑成型过程中的温度分布、压力分布、流动填充过程，可能会产生缩松（Sinkmark）的部 …

例句：

The results show that the optimum technology can ensure the progressive solidification of the castings and eliminate shrinkage and porosity.

结果表明，该优化工艺实现了铸件的顺序凝固，消除了缩孔、缩松。

The microstructure of leakage area was analyzed and it was revealed that there was shrinkage porosity in the leakage area .

对渗漏部位进行了金相分析，发现渗漏部位存在分散的缩松缺陷；

Shrinkage and shrinkage porosity, stress and deformation often occurs during the production of heavy steel casting.

大型铸钢件在实际生产中易产生缩孔缩松、应力变形等缺陷。

Stomatal, dispersed shrinkage, shrinkage cavity, sonim and slag inclusion belong to this kind of defect .

属于这种类型的缺陷有气孔、缩松、缩孔、夹砂、夹渣等。

The combination of above three measures is best for the elimination of the casting 's hot node and shrinkage defects .

同时采用上述三种工艺措施，对消除缸盖铸件热节点的缩孔、缩松缺陷效果最好。

Shrinkage porosity(hole)in thick-walled complex parts can be eliminated by chilling method .

对于壁厚复杂铸件常出现的缩松、缩孔问题，采用激冷方式得到解决；

Shrinkage porosity and shrinkage cavity have relation with heat expansion of metal in welding process and forge force in later welding time.

缩松和缩孔的产生主要与焊接过程中金属热膨胀及焊接后期锻压力大小有关；

What inspection functions are performed for the detection of casting cracks , porosity , and shrinks ?

如何检验铸件的裂纹，缩孔，缩松？

Casting defects, especially porosity, will reduce fatigue strength of the crank-shaft .

铸造缺陷，尤其是铸造缩松，降低了曲轴的疲劳强度。

the number of porosity is major factor of affecting tensile strength and elongation .

缩松的数量是影响抗拉强度和伸长率的主要因素。

Combining with his own working practice, the writer also proposed some suggestions about how to prevent the shrinkage porosity and cavity.

笔者还结合本人的工作实践就缩孔、缩松的预防提出了看法。

Shrinkage and porosity were basically eliminated by actual experiment .

经实际生产的验证，基本上消除了缩孔、缩松缺陷。

Based on productive practice , the reasons causing shrinkage defects were analyzed .

根据生产实践，对铬铜铸铁活塞环缩松问题进行讨论分析。

while the porosity area is between 6% and 8%, the variation trend of elongation is even .

当断口的缩松面积在 6%~8%时，伸长率的变化较为平缓。

Solution of the Shrinkage Cavity and Porosity in the Cylinder of Compressor Adopting the Proportional Solidification Technology

运用均衡凝固技术解决压缩机缸体缩孔缩松

Shrinkage Prevention of A Nodular Iron Rotator Seat Casting Produced with Green Sand Mould

湿型铸造球墨铸铁转子座缩松缺陷的防止

then the tensile strength and elongation significantly decreases with the increase of the porosity area ;

随着断口缩松面积的增加，抗拉强度和伸长率迅速下降；

A literature Summary of the Formation and Prevention of Shrinkage Cavity and Porosity in Ductile Iron Castings

有关球铁铸件缩孔缩松形成及预防的文献综述

Solidification Process Simulation and Shrinkage Cavity Prediction of Cylinder Head Casting

气缸盖铸件凝固过程数值模拟及缩松缩孔预测

Solution to the Shrinkage Defects in Machine Tool Bed Castings Using Proportional Solidification Theory

运用均衡凝固理论解决机床工作台缩松缺陷

Simulation of the Microstructure and Forecasting of the Shrinkage of Ductile Iron Crankshaft

球铁曲轴显微组织模拟及缩孔缩松预测

Prediction of Shrinkage Defects in a Third Class Moving Turbine Blade by Invested Casting

精密铸造三级动叶片缩松和缩孔缺陷的预测

The Investigating on the Forming Mechanism and Preventing Measures of Shrinkage and Porosity in the Ductile Hub Castings

轮毂类球铁件缩孔缩松缺陷的形成机理及防治措施

Using Pressure-Controllable Feeder to Eliminate Shrinkage Defect of Ductile Iron Crankshaft

采用可控压力冒口消除球铁曲轴缩松缺陷

The Investigation of Influence Factors on Shrinkage and Microporosity Defects in Nodular Iron Casting

造成球铁件缩孔缩松缺陷因素的研究

缩松

缩松

shrinkage porosity

usp

shrinking casting

dispersed shrinkage

Triamcinolone Acetonide

Sinkmark

热词推荐

大家在看